MaticKos Photography

Flash and umbrella holders


Over the years I've bought, destroyed and lost a number of different speedlight & umbrella holders. Some were great, some were crap adequate, what I have left I put together and did a quick comparison review.

There are A LOT of holders out there, with different speedlight mounts, different light stand mounts, type and number of joints, materials, weight capacity, etc, as well as different prices. Basic ebay holders start at around 4€, the big gun from Manfrotto costs 35€ or more. But the most expensive might not be the best one, it all depends on your needs.



Basic ballhead

One of the most basic and cheapest ouf there is a ballhead holder. Made partly from metal, partly plastic, this thing weights only 98 grams. Ballhead is a plus, there's a 360 degrees of rotation, so you can point it anywhere you want. Minus is the plastic shue mount, where you put the speedlight in. It holds it by friction, no locking mechanism here, so it's not the best solution. Another problem is the position of the speedlight mount. Since it's only screwed on the ballhead, you can't really position it the way you want it, you can either fully screw it on (and be stuck at the position that is it) or you can unscrew it a bit, to position the speedlight the way you want in relation to the umbrella. It's better to fully screw it on, then rotate the head of the speedlight. Umbrella hole is on the neck of the ballhead, so no individual position of the umbrella. Another problem is the hole for mounting onto a light stands - it's too short. You can't firmly fix the holder to the stand if it has a shaped head, it slips off and locks at an angle. But it is small and light, if you're on location it might be ok for background lights, where you set it and leave it alone.



German double joint

These holders were one of my first and probably the best. I found them years ago on german ebay, made by a guy in his garage. Totally metal, with standard hotshue mount with locking hole as well as pc sync, they weigh only 150 grams. Huge plus for me is the dual joint. Umbrella shaft is on it's own section so you can align your speedlight with the umbrella shaft. This minimizes the blocked light and centers the light with the umbrella center for maximum efficiency. Hole for light stand is long enough for secure fix, so there's no chance it'll slip off.  Sadly, these aren't on the market anymore. I bought 4 with hot shue mounts and 2 with 1/4 screw mount and I still love them! Sadly, 3 got stolen lost over the years.



Basic steppable

Very popular are these black steppable holders that you can find all over the place. They're small and light at 140 grams. The head is made from metal, body from strong plastic. But not strong enough. I broke 2 of these by over-tighting the light stand screw. Sure, if you're carefully that won't happen, but when you're in a rush you forget and the plastic side cracks. But that doesn't mean it's useless, I still use them since the plastic is strong enough to hold even with a cracked side.
Same as the ballhead one, this one has umbrella hole on the same section as the speedlight head, so no individual positioning. Big plus for this holder is steppable angle lock that actually works. There are plastic teeth that interlock at different position (there are about 60 teeth, so it does a wide degree of angles) to secure the head and eliminate slippage. I personally don't like this screw-type fixing heads, but they do offer a big area to fix the speedlight. Another thing with this head is, if you have an L shaped speedlight shue, it will block the head from locking securely. That's why I made a modification with a chinese seller to include three grooves on the head. Those now allow the L shape shue to slide in the groove and you can securely lock it. So look for version nr.2 if you're buying this type of holder or click here.



Selens double joint

Another dual joint holder that I got a while back is the Selens brand. At around $25 it isn't the cheapest one, but it looked the best and strongest. Made from all metal parts, with locking teeth on all joints and metal wing nuts screws, I was hoping I found my favorite holder. Sadly, that didn't happen.
Those locking teeth are the first problem, they do lock at the position of the first teeth, but there's still some movement left, which I don't like. Wing nut screws are the second and bigger problem. I don't know if I got a bad copy (or two, since I bought two of these) or is it just cheap materials and metal, but on three screws the wings just broke off. They didn't fall off, the top section just broke away from the screw and now turns with no friction and no effect. Since one did that on a shoot I was stuck with a screwed screw and no way of unscrewing it. Luckily I had pliers with me, so that did the trick. But since I couldn't rely on those screws anymore, a trip to the metal store was necessary, buying and replacing all screws and nuts. Which still annoys me. Due to the screws I now don't really have faith in these holders, I'm always a bit worried when I put something heavier on them that something will break or bend.




Manfrotto is a well known Italian brand and it's products are always high quality. Same goes for this holder. Made 100% from metal, with 416g weight, there's no chance anything will break anytime soon. Umbrella hole is on the same section as the speedlight mount, so sadly no independent tilting, but for bigger umbrellas and/or speedlights/flashes Manfrotto is capable of handling almost everything. For studio work or when I need something secure and reliable - this are my "go-to" holders.



Selens 3in1

One specialty holder that I got is Selens 3in1. As the name says, I can put 3 flashes onto one holder. The reason I got this was my 188cm umbrella (which I'll do a review of sometimes soon). With that size you need quite a bit of light. Since I don't like carrying big Elinchrom lights and power packs out into the field, this 3in1 holder + 3 flashes seemed like a good and compact idea. But again, chinese have failed me.
The holder does what its supposed to, it holds 3 flashes, has correct angles so it covers the whole surface of the umbrella, even has a single 3.5mm sync hole so you can trigger all the flashes at once, but quality of materials just isn't there. It feels flimsy, it doesn't hold secure, it feels it'll broke in the first wind. It doesn't have the standard hole to mount it on a light stand, instead it uses a 1/4 thread which is way to small and insecure in my opinion. With 188cm sail and 3 (expensive) nikon flashes I'm just not taking my chances. I've used it 2 or 3 times indoors and even then I was worried. But, it's out there if you need it or have a smaller umbrella. I have recently switched to AD360 (360Ws flash with real bulb, almost the size of a regular flash with it's own (and small) power pack; I'll do a review sometimes soon) flash for most of my outdoor shoots, so I don't need this thing anymore.

There are many different type of holders out there. Do you need something small for the background lights, something light for field work or something strong for studio, the choice is yours. There isn't a universal holder that would do everything, so you have to plan in advance and get/use what you need.
My personal relationship with flash holders isn't over yet as it seems.. I have found (and ordered) a new holder, a mix of manfrotto holder with double joint. Will add it to this review once I get it, so stay tuned.


MySpaceFacebookTwitterBlogger PostWordPressDeliciousNetlogTypePad PostTumblrRedditDiggLiveJournalStumbleUponBox.netLinkedInPushaS/B

Flash holder/adapter/drzalo/nosilec za enojni ali dvojni flash

Že pred časom sem pisal o Flash holderju/adapterju/držalu za bliskavice, katerega sem za kitajcke malo modificiral. Lahko povem, da so spremembe že izvedli in je novi adapter že v proizvodnji in prodaji.  :)

Sam adapter ima dimenzije okoli 106x70x50mm, z skupno težo okoli 140g. Ko se ga zloži na polovico se dimenzije spremenijo v okoli 80x80x50mm. Teža seveda ostaja nespremenjena ;) Telo je iz trdne ABS plastike, glava in sani pa aluminija. Vsi vijaki in navoji so kovinski, tako se z časom ne bodo uničili, kot pri veliko plastičnih adapterjih. Adapter ima klasično odprtino za 5/8" stojalo, mogoče velja omeniti, da ga je možno pritrditi klasično navpično ali pa vodoravno. Ima tunel za dežnik, ki je pod rahlim kotom, da dosežemo bolj enakomerno porazdelitev svetlobe. Tunel ima kovinsko vzmet, ki prepreči, da bi dežnik pomotoma padel iz tunela in tudi vijak za fiksno pritrditev. Sama glava adapterja deluje po principu sani s katerimi stisnemo bliskavico. In ravno tu se je pojavil problem, ki smo ga zdaj odpravili. Novejše (oz. niti ne tako nove) bliskavice imajo kovinsko nogo, ki je na eni strani zavita v telo bliskavice. Ravno ta krivulja pa je preprečevala, da bi sani nogo bliskavice dobro prijele. Zato smo na glavi dodali utore, na obeh straneh sani. To povzroči, da se noga bliskavic zatakne v utor, sani enostavno zapremo in bliskavica je trdno prijeta. Nobeno tresenje ali kaj podobnega je ne bo snelo, kot se je to dogajalo pri originalni verziji adapterja. Na glavi se nahajajo trije utori: en na sredini in po en na vsakem robu, cca 10mm od roba. Taka razporeditev je bila narejena namenoma saj omogoča, da lahko na enem adapterju uporabimo dve bliskavici hkrati. :)  Še eno podrobnost ne smem pozabiti, sredinjski zgib je v obliki zobnikov, tako bo fiksno držal kot, ki ga želimo in ne bo drsel kot se to dogaja pri mnogim modelih.

Pišuka, tole se pa bere kot ena top-shop reklama :/  Navali narode: kupiš 2, plačaš 3, dobiš 1... :D

Skratka, super zadevca, majhna, trdna, trpežna, drži kot šus, cena pa tudi sitnica. Če koga zanima, naj se oglasi. Kitajc bi mi rad poslal trajekt za nadaljno prodajo, sem mu komaj razložil kako "velika" je Slovenija. Sigurno je mislil, da sem govoril o svoji "vasi" in ne državi. Se kar bojim, da me en dan pokličejo iz Luke Koper..  :S


Dvojni in enojni flash holder

Za kitajcke z ebaya ze nekaj časa delam izboljšave njihovih artiklov. Zadnji v seriji je držalo za flash in dežnik. Naredili smo prvo spremembo, ki omogoča izredno trdno in stabilno držanje novejših bliskavic kot so npr. Nikon SB600/800/900. Novejše bliskavice imajo drugačno nogo kot predhodnice, tako držala na sani niso bila najbolj učinkovita. Sedaj pa smo naredili utore, kamor se flash zatakne in drži ko šus :)

Druga nadgradnja pa je možnost uporabe dveh bliskavic hkrati. V kolikor fotkamo na terenu in imamo neko svetlobno okno/panel/odbojnik, si z uporabo večih bliskavic povečamo svetlobno moč. Namesto dveh stojal, imamo tako možnost uporabe samo enega. In kot vsi vemo, ko rinemo skozi gozd s 47kg stekla in plastike, je vsak kg še kako pomemben :)

Več informacij >> Update: nova objava z več podatki o artiklu..

Z vstopom na strani pod domeno "" se strinjate z uporabo poškotkov / By entering sites under "" domain, you agree to the use of cookies. Vec info / More info

Vse spletne strani pod domeno "" uporabljajo piškotke, ki omogocajo boljše in lazje delovanje strani. Nekateri piškotki so za delovanje strani nujni, drugi sluzijo izboljšanju uporabniške izkušnje in statistike obiska. Za nadzor nad piškotki lahko prilagodite svoje nastavitve brskalnika. Ce nadaljujete z deskanjem po spletnih straneh pod domeno ali ce kliknete na gumb "Potrdi", se z uporabo poškotkov strinjate.

Uporabljeni piškotki na strani:

FACEBOOK // Uporabljen za spremljanje obiska in objav na socialno omrezje.

GOOGLE // Piškotek za spremljanje gibanja uporabniki po naši strani in kreiranje statistike.

UVC // Piškotek za izdelavo statistike obiska.

PHPSESSID // Piškotek za optimizacijo delovanja spletne strani.

The cookie settings on websites under the domain "" are set to "allow cookies" to give you the best browsing experience possible. Some cookies are needed for normal functioning of the page, some are used to enhance user experience and provide statistics. You can adjust your cookies prefferences in your browser.. If you continue to browse websites under the domain "" without changing your cookie settings or if you click the "Accept" button below, then you are consenting to this.

Cookies used on this site:

FACEBOOK // Used to track visitors. Features for sharing via Facebook. Does not set a cookie by itself, but if one is present it will read it.

GOOGLE // Used to track visitors. Collect information about how visitors use our site. We use the information to compile reports and to help us improve the site. The cookies collect information in an anonymous form, including the number of visitors to the site, where visitors have come to the site from and the pages they visited.

UVC // Used to collect information about how visitors use out site.

PHPSESSID // Required cookie to improve our site

Zapri / Close